[Solution]VPN Network Design for SME network and VPN services

Tasks: There are two parts to this assignment, i.e.. part A and part B. Investigate, design and develop a suitable VPN network for an SME…

Tasks:

There are two
parts to this assignment, i.e.. part A and part B.

Investigate, design and develop a suitable
VPN network for an SME by addressing the following criteria.  See detailed instructions in the next
section.                                                                               25 marks

Presentation                                                                                                                                                      5 marks

Note:

Only one report for part A and one presentation
slide for part B per group should be submitted. As this is a Group Assignment
make sure the contribution made by each student is clearly mentioned on the
front page of the report. Each student in the group must make sufficient
contribution. The report must be properly formatted and have a table of
contents.

Part A description:

There are two areas
to consider for VPN network design in this assignment.

Design a network for SMEBuild VPN services for the users

Report must
include:

IntroductionScopes and LimitationsRequirements (Network parts and VPN
service parts)Solution DesignLogical designPhysical designNetwork topologiesIP addressingSecurity features and policiesRedundancy and failover plansVPN service implementationRefer the sample document included below
for network design, and consider how to implement VPN services onto the
network.

Marking criteria:

Marks are allocated as indicated on
each question, taking the following aspects into account:

Section
to be included in the report and demonstration

Description

Identification and analysis and
description

Correctly identifying,
appropriateness, discussion

Explanation/justification

Description and justification

Presentation and diagrams

Structure, presentation, formatting,
writing

Reference style

Follow
IEEE reference style

Plagiarism

Copy from another student, copy from
internet source/textbook, copy from other sources without proper
acknowledgement, etc.

Marking guide:

Task A –                                                                                                                       Total
25 marks

No

Categories

Description

Marks

1

Template and format

The document should include all necessary headings
and contents to depict a VPN services and network design as per the example
provided.

5

2

Requirements

Multiple figures and tables need to be included to
properly show the requirements development. There must be a section for
‘compliance’ check so that vendors can properly reply to the requirements.

5

3

Solution Design

This section should include proper headings and
contents to propose a solution for a VPN network. Wireless LAN solution needs
to be included.

15

 

 

Total

25

Part B description:

Task B –                                                                                                                       Total
5 marks

Students need
to demonstrate their work in Laboratory class 11. Demonstration will include
viva voce (oral test) questions as well. The solution of VPN services and network
design shall be presented with 15 minutes per group during week 11 Laboratory class.
Presentation slides should be submitted in Moodle prior to the presentation for
marking. No other options (e.g., hard copy, memory stick, website, email, etc.)
will be considered, but only the presentation file submitted in Moodle.

Marking Rubric for Assignment 2 Questions-Marks as shown

Grade
Mark

HD
80%+

D
70%-79%

CR
60%-69%

P
50%-59%

Fail
< 50%

 

Excellent

Very Good

Good

Satisfactory

Unsatisfactory

Identification and Analysis and
description

Highly valid and appropriate against
the quality of the sample provided

Valid and appropriate against the
quality of the sample provided

Generally valid and appropriate

Valid but not appropriate

Not valid and not appropriate

Explanation/
justification

All elements are present and well
integrated.

Components present with good contents
and detailed level

Components present and mostly well
integrated

Most components present

Lacks structure. 

Reference style

Clear styles with excellent source
of references.

Clear referencing/ style

Generally good referencing/style

Unclear referencing/style

Lacks consistency with many errors

Presentation and diagrams

Template and formats of the
presentation are provided with professionally presented

The presentation is provided with
some deficiencies

Mostly good, but some structure or
presentation problems

Acceptable presentation

Poor structure, careless
presentation

The post VPN Network Design for SME network and VPN services

Assignment status: Solved by our experts

>>>Click here to get this paper written at the best price. 100% Custom, 0% plagiarism.<<<

Leave a Reply

Your email address will not be published. Required fields are marked *